Plumbing, Heating & Ventilation
1/2" x 3/4" Male Hose Thread x 12" Frost Free Sillcock, Push To Connect Anti Siphon, 1/2" Push Inlet Compatible With Copper, Pex, CPVC Or PE-RT Pipes & 3/4" Male Hose Thread Outlet, Integrated Hose Bibb With A Durable Forged Body For Strength, Multi Turn Shut Off Valve Is Located At The Inlet Of The Sillcock To Help With Freeze Resistance & Allows For The Regulation Of Water Flow, Comes With Integrated Mounting Flange To Secure It To The Mounting Surface & Integrated Air Gap Back Flow Prevention System To Prevent Any Potential Back Siphonage, NSF372 & NSF/ANSI 61 Approvals.
1/2" x 3/8" Compression x 3/8" Compression, Dual Outlet Supply Stop, Designed For Running 2 Supply Lines Like A Dishwasher & Kitchen Faucet Or Dual Vanity From A Single Subout Under The Sink, Compatible With Copper, Pex, CPVC Or PE-RT Pipe At The Inlet Connection.
1/2", 45 Degree Elbow, Connects Any Combination Of Copper, Pex, CPVC Or PE-RT Pipe Together To Form A 45 Degree Connection, Ideal For Hard Piping Applications Where 90 Degree Bend Is Too Much, With No Soldering Clamps Unions Or Glue Required, Simply Insert The Pipe Into The Fitting Deep Enough To Be Sealed By Our Specially Formulated Oring, Push To Connect Fitting Is Designed For Potable Water & Radiant Heating Applications With No Access Panels Required, Rated Up To 200 Degrees Fahrenheit & 200 PSI.
SharkBite 3/4" 45-Degree Elbow. It connects any combination of copper, PEX, CPVC or PE-RT pipe together to form a 45-Degree connection. It is ideal for hard piping applications where 90-Degree bend is too much. No soldering, clamps, unionsor glue required. Simply insert the pipe into the fitting deep enough to be sealed by our specially formulated O-ring. Push to connect fitting is designed for potable water & radiant heating applications with no access panels required. Rated up to 200 degrees Fahrenheit & 200 PSI.
3/4" x 1", Sharkbite RT Pex Barb Reducing Coupling, Made Of Lead Free DZR Brass, Easy To Install, Allows For You To Reduce Pipe Size With 1 Fitting, Compatible With Potable Water Distribution & Hydronic Heating Applications, Can Be Used In Both Stainless Steel Clamp Systems Or A Copper Crimping System, ASTM F1807, SNF/ANSI 61, NSF 372 Approvals.
Pex Clamp Cinch Tool, For Clamping 3/8" To 1" C" Clamp Rings For Pex Tubing, Stainless Steel, Sharkbite Barb Connection System Is The Best Option For Connecting Pex Tubing In Water Distribution Systems When Lower Material Cost Is Desired, Robustly Constructed With DZR Brass & Is Corrosion Resistant, NSF Approval.
1/2", Disconnect Tong, To Change An Existing Sharkbite Fitting Or Remove It, Disassembly Is Fast & Easy Using The Disconnect Tongs.
3/4", Disconnect Tong, To Change An Existing Sharkbite Fitting Or Remove It, Disassembly Is Fast & Easy Using The Disconnect Tongs.
1", Disconnect Tong, To Change An Existing Sharkbite Fitting Or Remove It, Disassembly Is Fast & Easy Using The Disconnect Tongs.
Freeze Free 5' Heat Cable Kit, Contains: Plug, Gel, End Seal & Instruction Sheet, Includes 1 Each: 5' Freeze Free Cable & Model #10802 Connection Plug With End Seal, For Plastic & Metal Pipes, Built In Fast Reaction Fuse, Power Indicator Light Indicates An Intact Fuse, Grounded 30" Cord Set, Requires Less Heating Cable, Pipe Mounting Brackets For Easy Attachment To Typical Water Pipes, Easy Installation, Protects Pipes To -60 Degrees Fahrenheit, -51 Degrees Celsius, UL Approved.
HomePointe, Chrome Finish, Upgraded 2 Lever Handle Lavatory Faucet, With Plastic Pop Up, Brass Waterways, 4" Center Distance, 1/4 Turn Ceramic Disc Valving, Watersense Certified, Meets California AB1953 No Lead Standard.
HomePointe, PVD Brushed Nickel Finish, Upgraded 2 Lever Handle, Lavatory Faucet, With Plastic Pop Up, 1.2 GPM, Brass Waterways, 4" Center Distance, 1/4 Turn Ceramic Disc Valving, Watersense Certified, Meets California AB1953 No Lead Standard.
HomePointe, PVD Brushed Nickel Finish, Single Lever Handle, Lavatory Faucet, With Plastic Pop Up, 4" Center Distance, Brass Waterways, Metal Housing With Finish Matching Underbody, Stainless Steel Ball Washerless Design, Copper Inlets, Meets California AB1953 No Lead Standard.
HomePointe, Chrome Finish, Single Handle, Kitchen Faucet, Pull Down 2 Function Spray Head, 1.8 GPM, 8" Center Distance, For 3 Or 1 Hole Installations, Ceramic Cartridge, Optional Deck Plate.
HomePointe, Brushed Nickel Finish, Single Handle, Kitchen Faucet, Pull Down 2 Function Spray Head, 1.8 GPM, 8" Center Distance, For 3 Or 1 Hole Installations, Optional Deck Plate Included.